Choose your DB Killer / Baffle from the dropdown in the grey box.

If you have a Fuel exhaust already, please select the appropriate range, add to your basket and checkout and then we will sort the rest! If you have another manufacturers exhaust, you will need to measure your outlet size as shown in the image below.

Once you have measured the internal diameter size, you need to select ‘Universal’ from the dropdown as well as the style and the size required. We manufacture our dB killers 0.5mm smaller than the internal diameter of your outlet to allow snug fitment. Our angled DB killers have a 16 degree angle.

Please note it is your responsibility to measure your outlet correctly for Universal fitments. Universal DB killers are not pre-drilled (for the nut and bolt) as not all exhausts are the same.

Custom sizes are available between 46mm OD and 65mm. Please contact us to discuss your requirements - [email protected] / 01539 738333.

NOTE - THE FUEL CLASSIC BAFFLE DOES NOT FIT THE OLD STYLE ROLLED OUTLET EXHAUSTS PRODUCED UP TO 2013. PLEASE CONTACT US FOR THE APPROPRIATE BAFFLE FOR THAT EXHAUST STYLE.

THESE dB KILLERS ARE DESIGNED FOR USE IN EXHAUSTS LIKE OURS WHICH USE INTERNAL EXHAUST WADDING / PACKING MATERIAL. THEY ARE NOT INTENDED FOR USE IN STRAIGHT THROUGH PIPES WHICH DO NOT USE EXHAUST WADDING AND THEREFORE WILL NOT BE EFFECTIVE. PLEASE GET IN TOUCH SHOULD YOU NEED FURTHER INFORMATION BEFORE PURCHASING.